Chiptuning Cuijk · since 2007

Custom Stage 1 chiptuning

More power and torque, with software only. Custom written for your engine, measured on the road dyno before and after, and the original software always kept.

4.9/5 Trustpilot · 4.8/5 Google · Google and Trustpilot reviews
Audi RS6 in de werkplaats van Chargertech in Cuijk
Audi RS6In our workshop in Cuijk
Price
from €299
Turbo gain
+20-35%
Duration
1-2 hours
Original
Always kept

What is Stage 1 chiptuning?

Stage 1 is a change to the software in the engine control unit (ECU) only. No parts come off or go on your car. We read the original software, adjust the maps for boost pressure, injection, ignition and torque limits within the limits of your engine, and write the new software back. From the outside the car looks exactly the same.

Modern turbo engines often leave the factory with a sizeable reserve. Manufacturers use one engine for several power versions and allow for poor fuel, extreme heat and countries with different requirements. That is the headroom Stage 1 uses.

How much power does Stage 1 deliver?

Engine Typical gain
Turbo petrol (TSI, TFSI, B48, M274) 20-35% power, often even more torque
Turbo diesel (TDI, N47, B47, OM651) 15-30% power and torque
Naturally aspirated engine 5-10%, mainly a smoother throttle response

These are guide values. What your car achieves depends on the engine version, the ECU and the condition of the engine. Enter your car in the chiptuning calculator below, or send us your registration number: you get a proposal upfront with the expected gain.

Custom, not off the shelf

Many providers load a ready-made file that is the same for thousands of cars. We write the tune for your car and check it with a road dyno and data logs: boost pressure, ignition, intake temperature and lambda all have to be right, in summer too. That keeps the engine healthy and you know what you are getting.

How does a Stage 1 tune at Chargertech work?

  1. Check: reading fault codes, assessing the engine and its service history.
  2. Measurement before: road-dyno run with the original software.
  3. Tuning: reading and safely storing the original software, writing the modified software.
  4. Measurement after: a new run and logs, so you see the difference in black and white.
  5. Test drive and explanation: we go through the results with you.

A Stage 1 tune usually takes one to two hours. You can wait in Cuijk with a cup of coffee.

What does Stage 1 cost?

Stage 1 starts at €299, including a road-dyno measurement before and after. For some ECUs the unit has to be removed from the car and read on the bench; in that case the price is higher. You always hear the price upfront.

Want to go to Stage 2 later?Stage 1 is the foundation. When you add a downpipe, intercooler or intake, we rewrite the software for Stage 2; you then only pay the difference.

Why Chargertech?

  • Since 2007 active in performance and tuning, with more than 5,000 vehicles done
  • Every tune custom written, not taken from a standard file
  • Road-dyno validated: we measure what the tune really delivers
  • Workshop and webshop: we have Stage 2 parts in stock ourselves or can get them quickly
  • Check first, then tune: we read the fault codes and look at the condition of the engine
This chiptuning is not available yet. The ECU of this vehicle is currently locked. Feel free to contact us for the latest status.

Measured on our road dyno

Real cars from our workshop in Cuijk, measured before and after. So you know what a tune really delivers.

  • Volkswagen Golf 7R na Stage 1+ chiptuning en DSG-tune bij Chargertech +51 hp

    Volkswagen Golf 7R

    Stage 1+ ECU tune + DSG tune

    Power 334 → 385 hp
    Torque 477 → 549 Nm

    Baseline already with downpipe and intake · +72 Nm

    More about Stage 1 chiptuning →
  • Porsche 992 Carrera 4S voor de werkplaats van Chargertech in Cuijk +132 hp

    Porsche 992 Carrera 4S

    Downpipes + ECU tune

    Power 456 → 588 hp
    Torque 527 → 695 Nm

    Measured before and after on our road dyno · +168 Nm

    More about Stage 2 chiptuning →
  • Seat Leon 1.4 TSI FR tijdens de Stage 2-ombouw bij Chargertech +49 hp

    Seat Leon 1.4 TSI FR

    Stage 2: downpipe + software

    Power 143 → 192 hp
    Torque 248 → 330 Nm

    Baseline completely stock · +82 Nm

    More about Stage 2 chiptuning →

Request your Stage 1 proposal

Send us your registration number. You get the expected gain and the price for your car upfront.

  • Quote in advance, no obligation
  • Since 2007, all makes
  • Workshop in Cuijk, Lange Beijerd 14E

We only use your details to answer your request. Privacy policy

Frequently asked questions

How much horsepower does Stage 1 add to my car?

On turbo engines usually 20-35% more power and often even more torque. On naturally aspirated engines 5-10%. Use the calculator on this page or send us your registration number for a proposal for your engine.

Do I need other parts for Stage 1?

No, Stage 1 is software only. The engine does need to be healthy: we check beforehand for fault codes and overdue maintenance.

Will my fuel consumption go up?

When driving calmly, consumption stays the same or drops slightly, because the engine does the same work with less throttle. If you use the extra power, you will use more fuel.

Will the dealer see that the car has been tuned?

We can put the original software back. Some manufacturers do keep track of how often the ECU has been written, so a tune is never completely invisible. If you have doubts about your warranty, discuss it with us beforehand.

Is chiptuning safe for my engine?

A good tune stays within the limits of the engine, the turbo and the clutch. That is why we write every tune to measure, check the result with a road dyno and logs, and tell you honestly if an engine needs maintenance first. Also read our advice on servicing after chiptuning.

Do I have to tell my insurer about chiptuning?

Yes. Always report a power increase to your insurer, so you know for sure you are properly covered. We give you an overview of the power before and after the tune.